Intel Adaptateur Serveur 10Gigabit AF DA Double Port

Specifications General Product code E10G42AFDA Connectors SFP+ connectors Cabling • SFP+ direct attached cable (twinaxial) only • Other SFP+ optics are not allowed and cannot be used with this adapter Adapter Product Features Intel PROSet Utility : For easy configuration and management Intel lead-free technology Plug and play specification support Standard Intel® I/OAT2 including QuickData Ships with full-height bracket installed,low-profile bracket added in package RoHs Receive-side scaling VMDq In a virtualized environment, packets dedicated to different virtual machines can be routed to different queues, thus easing the routing of these packets to the target machine Advanced packet filtering (per port) • 16 exact-matched packets (unicast or multicast) • 4096-bit hash filter for multicast frames • Promiscuous (unicast and multicast) transfer mode support • Optional filtering of invalid frames Direct Cache Access (DCA) The I/O device activates a pre-fetch engine in the CPU that loads the data into the CPU cache ahead of time, before use, eliminating cache misses and reducing CPU load Network Management DMI 2.0 support, Windows Management Instrumentation (WMI) and SNMP Remote Installation Services (RIS) PXE 2.0 enabled through boot Read-Only Memory (ROM) Network Operating Systems (NOS) Software Support Microsoft Windows 2003 Server IA32, X64 Microsoft Vista IA32, X64, IPF Windows Virtual Server 2005 IA32, X64, IPF Red Hat Linux 2.6x or later IA32, X64, IPF SUSE SLES 10 or later, Professional 9.2 or later IA32, X64, IPF FreeBSD 5.x or later IA32, X64, IPF ESX 3.x support (for VMware) IA32, X64, IPF Fedora IA32, X64, IPF EFI 1.1 IA32, X64, IPF Advanced Software Features Adapter Fault Tolerance (AFT) Switch Fault Tolerance (SFT) Adaptive Load Balancing (ALB) Teaming support IEEE 802.3ae Test switch configuration Tested with major switch original equipment manufacturers (OEMs) PCIe Hot Plug/Active Peripheral Component Interconnect (PCI) IEEE 802.1Q VLANs IEEE 802.3 2005 flow control support Tx/Rx IP, TCP, & UDP checksum 0 offloading (IPv4, IPv6) capabilities control protocol (TCP), user datagram protocol (UDP), Internet protocol (IP) IEEE 802.1p TCP segmentation/large send offload MSI-X supports Multiple Independent Queues Interrupt moderation IPv6 offloading Checksum and segmentation capability extended to new standard packet type Technical Features Data rate supported per port 10 Gigabit Bus type PCI Express 2.0 (2.5 GT/s) Bus width x8 lane PCI Express, operable in x4,6 x8 and x16 slots Bus speed (x8, encoded rate) 20 Gbps uni-directional; 40 Gbps bi-directional Interrupt levels INTA, INTB, INTC, INTD Hardware certifications FCC B, UL, CE, VCCI, BSMI, CTICK, MIC Controller-processor Intel 82598EB Typical power consumption 12.2 W maximum power, 10.1 W typical power • PCI Express +3.3 V power supply – consumes 2.3 A max, 1.7 A typical • PCI Express +12 V power supply – consumes 0.4 A max, 0.4 A typical Airflow 150 LFM (Linear Feet per Minute) Operating temperature 0° C to 55° C (32° F to 131° F) with 100 LFM forced airflow (linear feet per minute) Storage temperature -40° C to 70° C (-40° F to 158° F) Storage humidity 90% non-condensing relative humidity at 35° C LED Indicators LINK (solid) and ACTIVITY (blinking) Physical Dimensions Length 16.74 cm (6.59 in) Width 6.89 cm (2.71 in) Height of end bracket PCI Express standard, 12 cm (4.725 in) PCI Express low-profile, 7.92 cm (3.12 in)